Saab 2007 owner manual Rearview auto-dimming, Mirrors, Opening a garage door

	Interior equipment and trunk			121
Opening a garage door	Rearview auto-dimming
To operate, simply press and release the	mirrors 3
programmed button. Activation will now	The autodimming is activated and deacti-
occur for the trained device (i.e. garage door
	vated with a short push on button 2.
opener, gate operator, security system,
	If the mirror is equipped with Garage Door
entry door lock, home/office lighting, etc.).
	Opener (option) the letter 1 is displayed on
For convenience, the hand-held transmitter
	compass bearing display briefly when auto
of the device may also be used at any time.
	dimming is activated. When deactivating
NOTICE	the letter 0 is displayed.
	The interior rearview mirror has two sen-
Switch off the power supply to the garage	sors, one forward-facing and one rear-fac-
	ing. They also activate and deactivate the
door or gate (or park the car beyond the
	auto dimming feature on door mirrors.
range of the remote control) while pro-
	The system is activated when the for-	1	Forward-facing sensor
gramming using the "cycling" method to
	ward-facing sensor detects that it is dark	2	ON/OFF switch, auto dimming function
prevent damaging the electrical motor.
	outside and the rear-facing sensor detects.	3	Rear-facing sensor
	For example, if the car following has not
	dimmed its headlights. The rearview mirrors
	are then darkened to prevent the strong light
	source from dazzling the driver. This dark-
	ening is stepless.

This device complies with Part 15 of the FCC Rules.	The mirrors return to their normal states
	when the strong light source diminishes.
Operation is subject to the following two conditions: (1)
	The auto dimming function can be turned
this device may not cause harmful interference, and (2)
must accept any interference received, including inter-	OFF with the switch on the lower edge of the
ference that may cause undesired operation.
	rear-view mirror.
Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate	NOTE
the equipment.
Canada only:	Towing a trailer can cause the system to
This device complies with RSS-210 of Industry Canada.	malfunction, as the rear-facing sensor may
Operation is subject to the following two conditions: (1)	sense light from the trailer.
this device may not cause interference, and (2) this
device must accept any interference, including interfer-
ence that may cause undesired operation of this device.