Saab 2007 owner manual License-plate light, Side direction indicators

Car care and technical information 213

IB3922

License-plate light

The lens is not screwed in place. It is held in place with snaps.

1One of the short sides of the lens con- tains a recess for a small screwdriver. Insert a screwdriver and prise out the lens.

2Fit the new bulb.

3When refitting the lens, the short side without the screwdriver recess should be inserted first.

Side direction indicators

1Slide the lamp fitting forward and pull out the back.

2Remove the bulb.

3Change the bulb.

On refitting, make sure that the spring in the lamp fitting engages the edge of the open- ing in the body panel.

IB522

Courtesy lights (front doors and floor) and luggage-compartment lighting

1Insert a screwdriver carefully into the slot in the end of the lamp fitting. Ease the fitting off to gain access to the bulb.

2Bend out one of the contacts and remove the bulb.

3Change the bulb.

On refitting, insert the connector-end of the lamp fitting first.