Saab 2007 owner manual Resetting values, Using Dist. as a trip meter, Select Speed Ø, Fuel Ø

70 Instruments and controls

Using Dist. as a trip meter

If no value is programmed in Dist., it func- tions as a trip meter. This is indicated by an arrow to the right in the display.

Reset the trip meter by briefly pressing the CLR button.

Calculating the arrival time if a specified average speed is maintained:

1Select Dist.

2Set the distance.

3Select Speed Ø.

4Set the average speed you intend to drive at.

5SID switches to Dist. automatically. The calculated arrival time is now displayed to the right.

The Speed Ø function will show actual values once you start driving.

Average fuel consumption, Fuel Ø

The average fuel consumption is calculated using the values for fuel consumed and dis- tance driven since last reset. This value is stored in the car’s trip computer even when the engine is switched off.

To reset the value, hold CLR depressed until a chime sounds. The text Cleared is displayed.

Resetting values

To reset the value, hold CLR depressed until a chime sounds. The text Cleared is displayed.

The following functions will be reset simulta- neously:

•D.T.E. (the value is reset to the distance that can be reached with the amount of remaining fuel)

•Fuel Ø

•Speed Ø (average speed)

Values programmed in Dist., Alarm and Speed W. are not reset. See respective function