Saab 2007 owner manual Adaptation of ACC

Instruments and controls 85

Adaptation of ACC

It is also possible to customize the ACC system, e.g. to adapt to driving and weather conditions.

Function Operation in AUTO mode	Factory setting
after adaptation
The rear window heating will	Heating is selected
come on after the engine has	manually.
started if the outside temper-
ature is below +5 °C.

–This function helps to pre- vent ice or mist forming on the rear window in cold, damp weather. Fuel con- sumption may increase slightly.

Seat heating comes on if the	There are two settings
system determines that	for heating. Repeat-
heating is necessary based	edly pressing the but-
on the temperature in the	ton switches between
seat and the outside temper-	low output, high output
ature.	and off.

Adaptation and restoration of factory settings is done by holding the respective button depressed approx. 2 seconds until a chime sounds.

Make sure the ignition is ON.

Function	Display text in SID	Display text in SID when
	during adaptation	factory settings are
		restored
	ACC:AUTO	ACC:MANUAL
	RDEFR CTRL	RDEFR CTRL
	ACC:AUTO	ACC:MANUAL
	SEAT HEATING	SEAT HEATING

Example: If you want the ACC system to handle activation and deac-

tivation of rear window/door mirror heating, hold the button depressed approx. 2 seconds until a chime sounds.

The display shows:

ACC:AUTO RDEFR CTRL

When “Adaptation of ACC“ is done, it will apply until factory settings are restored.