205 Car care and technical information

Headlight bulb for high beam (Halogen)

On cars equipped with Xenon lamps the Halogen lamps are used
only for high beam flasher if the daytime running lights are deacti-
vated and the headlight switch is in the off position (otherwise Xenon
lamp is utilized):
1 Remove the cover from the back of the lamp unit. To improve
accessibility to the right-hand side, hold back the induction air
hose. To improve accessibility to the left-hand side, remove the
battery cover. Release the two clips along the long sides of the
cover.
2 Hold the connector and move the bulb up and down slightly while
pulling it out.
3 Detach the connector from the bulb.
4 Fit the new bulb in the connector without touching the lens with
fingers.
5 Align and fit the bulb in its guide in the reflector by moving it up
and down slightly while pushing it forward.
6Fit the cover.
IB3894
IB3895

The three covers of the headlight.

The left-hand cover is for the direction indicator. Replacement of

this bulb should be carried out by a workshop. We recommend

that you contact an authorized Saab workshop.

95_U S_M 07.book Page 205 Friday, June 9, 2006 8:58 AM