QUICK START
To play a game right away, without reading the entire manual first, simply follow these Quick Start steps!
1
2
3
First, make sure that your Exclusive Board is turned off. Never insert a module while the Exclusive Board is on!
Open the drawer in the front of your Exclusive Board, and swing the handle up. You will see three slots. Insert the Senator and LCD Modules into any of the three slots available, pushing them until they are firmly in place.
Turn the Exclusive Board on, and then press GO/STOP on the Senator Module for at least one second to turn the module on. If the computer doesn’t respond, press GO/ STOP one more time.
GO/ |
STOP |
5 To reset the module for a NEW GAME of chess, simultaneously press the ENT and CL keys.
6 Enter your moves by simply making them on the board. When the computer moves, board lights indicate its move. If you installed the LCD Module in Step 2, the display will show the piece, the color, and the from and to squares of the computer’s move. Here, the computer wants to move its Black pawn from E7 to E5. Lift the Black pawn and make the move on the board. This completes the computer’s move, and now it’s your turn again. Enjoy your game!
ENT | CL |
4
Set up the chess pieces in the initial starting position, with the White pieces closest to you. Make sure all the pieces are centered on their squares!
!"#$%&'(
)*
Press GO/STOP at any time to turn the Senator Module off (before switching off the Exclusive Board). Your current game (up to 200 individual moves) will be stored in memory.
When you switch back on, you can continue playing right where you left off.
