Connecting a Printer Cable

To print from your computer, you need to connect your printer

 

to your computer with either a parallel interface cable or a

2

Universal Serial Bus (USB) cable.

 

If you are a Macintosh user, you can use only a USB cable.

Using a Parallel Cable

Note: To connect the printer to the parallel port of the computer requires a certified parallel cable. You will need to buy a IEEE1284 compliant cable.

1Make sure that both the printer and the computer are turned off.

2Plug the parallel printer cable into the connector on the back of the printer.

Push the metal clips down to fit inside the notches on the cable plug.

To the parallel port on your

3Connect the other end of the cable to the parallel interface port on your computer, and tighten the screws.

See your computer User’s Guide if you need help.

SETTING UP YOUR PRINTER 2.9

Page 26
Image 26
Samsung 1740 manual Connecting a Printer Cable, Using a Parallel Cable, See your computer User’s Guide if you need help