Samsung 4200 manual Changing the default settings, Using special copy features, Auto Fit copying

3Press OK to save the selection.

Changing the default settings

The copy options, including darkness, original type, copy size and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the menus on the control panel.

To create your own default settings:

1Press Menu until Copy Setup appears on the top line of the display.

2Press OK when Default-Changeappears.

3Press the scroll button ( or ) to select a setup option and press OK.

4Press the scroll button ( or ) to change the setting or enter the value and press OK.

A

Auto Fit copying

This feature automatically reduces or enlarges the original image to fit on the paper currently loaded in the machine.

NOTE: When the size of the document you want to copy is not same as the size of the paper loaded, this function automatically adjusts the size of the document to fit the paper. You can not adjust the copy size manually.

1Load the document to be copied on the document glass, and close the cover.

2Press Menu until Special Copy appears on the top line of the display.

3Press the scroll button ( or ) until Auto Fit appears and press OK.

4Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1.

5 Repeat steps 3 through 4, as needed.		NOTE: You cannot adjust the copy size using the Reduce/
		Enlarge menu while Auto Fit copying is enabled.
6 Press Stop/Clear to return to Standby mode.
		5 Press Start to begin copying.
NOTE: While you are setting copy options, pressing Stop/		ID Card copying
Clear cancels the changed settings and restores their default
status.		You can copy both sides of the ID Card like a drivers licence to
		a single side of paper.
		When you copy using this feature, the machine prints one side
Using special copy features		of the card on the upper half of the paper and the other side on
		the lower half without reducing the size of the original.
		If the loaded card is larger than the printable area, some
Clone copying		portions may not be printed.
		1 Place the ID Card to be copied on the document glass and
This feature prints multiple image copies from the original
document on a single page. The number of images is			close the cover.
automatically determined by the original image and paper size.		2 Press Menu until Special Copy appears on the top line of
1 Place the document to be copied on the document glass,			the display.
	and close the cover.	3 Press the scroll button ( or ) until ID Card copy
2 Press Menu until Special Copy appears on the top line of			appears and press OK.
	the display.	4 Customize the copy settings including copy size, darkness,
3 Press the scroll button ( or ) until Clone appears and			and original type, by using the control panel buttons. See
	press OK.		page 4.1.
		5 Press Start to begin copying.
4 Customize the copy settings including copy size, darkness,
	and original type, by using the control panel buttons. See		Your machine begins scanning the front side and will then
	page 4.1.
			display Set Backside.
		6 Open the document cover and flip the document over.
NOTE: You cannot adjust the copy size using the Reduce/
			Close the cover.
Enlarge menu while making a clone copy.
5 Press Start to begin copying.
4.2
	Copying