150 Section 2J: Using Press & Talk
Receiving a Press & Talk Call
To receive a Press & Talk call:
1. Make sure your phone's Press & Talk mode is enabled.
(See “Setting Press & Talk Mode” on page 142.)
2. When you receive a Press & Talk call from a contact,
“P&Talk Call,” the contact's name, and the Press & Talk
number appear on the display. (You do not need to take
any action to answer the call.)
䡲When you receive a group call, “Group Call,” the group
member's name, and the Press & Talk number appear.
3. If the person placing the call has kept the floor (held the
Press & Talk button), you will see the contact name and
Press & Talk number along with “has floor,” and you will
hear the caller speaking.
4. When the caller finishes speaking and releases the
Press & Talk button, you will see “Floor is open.” on the
display screen. Press and hold to take the floor
and reply to the caller. (You will see “You have floor” and
hear a tone confirming that you may speak.)
5. When the conversation is finished, press .
Tip: You can also receive a Press & Talk call with the flip closed.
Press and hold the Press & Talk button to take the floor when
the floor is open.
Note: You can change the volume and the speaker setting while a
Press & Talk call is activated.
䢇Volume: Adjust the voice volume by using the Side
Volume key or by pressing the navigation key up or
down except when you are pressing and holding the
Press & Talk button.
䢇Speaker: Switch the speaker on or off by pressing the
Speaker button.