VCR Protecting a Recorded Cassette | Samsung CHT-500 manual

GB

VCR Protecting a Recorded Cassette

1

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

VCR Recording a Programme Immediately

4

4

6

5

7

Before recording a programme, you must have preset the corres- ponding station (unless you are recording via an external video source). If you have not done so, refer to pages 19 and 20.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG ( or ) buttons or

◆The AV1, AV2 or AUX source using the INPUT SEL. button for a satellite tuner or external video source

Result: The station number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 29).

6Hold REC ( ●) down for a while to start recording.

Result: The record indicator appears on the television and DVD-VCR display. An index is recorded on the tape (see page 39).

7To stop recording, press ■ once.

➢◆ If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape.

◆If you reach the end of the tape while recording, the cassette rewinds automatically.

30

Image 30

Samsung CHT-500 instruction manual VCR Protecting a Recorded Cassette, VCR Recording a Programme Immediately

Contents

CHT-500 Contents Playing Back Symbols Safety Instructions Disc Type and Characteristics Disc MarkingsPlayback Region Number Front View of the DVD-VCR Rear View of the DVD-VCR10 11 12 PROG/TRK Infrared Remote ControlShuttle 33 UP 34 OK Display Indicators Accessories Deciding How to Connect DVD-VCR Connector Location Type Connecting DVD-VCR to the TV using the Coaxial Cable Connecting DVD-VCR to the TV using the Scart CableSocket on your AV1EURO AV By means of 21-pin Scart Cable By means of RF Coaxial CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR Deck Control Keys TV/VCR Button Inserting Batteries in the Remote ControlBasic TV Tuner Operations Prog Button Insert a blank VHS videotape into the VCR deck Copying from DVD to VCRInsert VHS Tape Copy the DVD to VHS Tape Open Menu Setting the Date and TimeSetting the Menu Language Select Language Presetting the Stations Automatically Presetting the Stations Manually 13 To...ThenIf you Then Clearing a Preset Station Changing the Preset Station Table Press the # or ❷ buttons, until the TV System option is Selecting the RF OUT Sound Mode G-KSetting the DVD-VCR Output Channel Selected VCR Selecting the Colour Mode Press OK or ❿, until Intelligent Picture Control VCR Auto Power Off VCR ShowView ExtendOff 1Hour 2Hour 3Hour E180 E240 300 E260 Screen MessagesSelecting the Cassette Type Press Return twice to exit the menu VCR Repeat Play VHS Play Selecting the Recording Speed VCR Protecting a Recorded Cassette VCR Recording a Programme Immediately If you wish to cancel the recording before the end, press Recording a Programme with Automatic StopThis function is not available in DVD recording VCR Using the ShowView To enter a ShowView, press the Timer button Modifying ShowView Programming If you wish to Then Using the Timer Programming Feature Checking a Preset Recording Cancelling a Preset RecordingOn completion, press Return three times Then press Adjusting Picture Alignment ManuallyPlaying a Cassette Stop the playback Eject the cassette Selecting the Audio Output Mode Playing a Cassette in Slow MotionOption Description Playing a Sequence at Variable Speeds Searching for a Specific Sequence This DVD-VCR uses a standard indexing system Viss Searching for a Specific Sequence Intro Scan Using the Tape Counter If the remaining time is to be calculated correctly, youPress Info VCR Connecting an RCA Audio/Video Input Cable Recording from Another VCR or Camcorder Audio Dubbing a Pre-recorded Cassette CD, DVD Brand Codes Button Function Choosing a Connection Connection to an TelevisionComponent Setting Up the Language Features Using the Disc Menu Language DVD Setting Up the Language Features Using the Audio LanguageUsing the Subtitle Language Setting Up the Audio Options DVD About the Change Password DVD Setting Up the Parental ControlOk your password again. The Parental Setup screen appears About the Rating Level Video Connections for DVD Setting Up the Display OptionsSends Component Interlace signal from Connect S-Video Out to TV Component Connections for DVD To Component Input on Your TV Special Playback Features If you are using a 169 TV For 169 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD For 43 aspect ratio discs For 169 aspect ratio discs Letter Box Adjusting the Aspect Ratio EZ ViewIf you are using a 43 TV Pan Scan Using the Display Function DVD/VCD/CD When Playing a DVD Changing the Camera Angle Using the Angle buttonUsing the Subtitle button Selecting the Subtitle Language Using the Zoom DVD/VCD Repeat Play Repeat Chapter/Title Selecting the Audio Language Recalling a Marked Scene DVD Using the Mark Function DVD/VCDUsing the Mark Function DVD/ VCD Clearing a Mark MP3-CD Playback MP3-CD Playback DVD WMA Play WMA Disc Playback Your MP3 or WMA files should be ISO 9660 or Joliet format MP3/WMA PlayCD-R MP3/WMA discs Do not try recording copyright protected MP3 files DVD Program Play & Random Play Picture CD Playback Thumbnail screen DVD Picture CD Playback CD-R Jpeg Discs Setting the Surround Speakers Setting the Delay TimeSetting the Center Speaker Distance of a m Setting ms Distance of B m Surround Speakers About Speaker SetupCenter Speaker Front Speakers Press the Speaker button Stop mode, press the Test buttonPress the Bass or Treble button Sound Mode Function Sound ModeDolby Pro Logic Listening to the Radio Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Press l or ❿❿l to tune in to a lower or higher frequency Presetting Stations Technical Specifications InputOutput Problems and Solutions VCR Problem Explanation/Solution Troubleshooting Guide DVD Problem Action Electronics