Samsung CHT-500 instruction manual Brand Codes, Button Function

Using the TV Buttons on the Remote Control							VCR
							GB
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible, follow the
instructions below.							1
1	Switch your television on.
2	Point the remote control towards the television.
3	Hold down the TV button and enter the two-figure code					2	2
	corresponding to the brand of your television, by pressing the
	appropriate numeric buttons.
	Brand		Codes	Brand	Codes
	SAMSUNG		01 to 06	PHILIPS	02, 20, 22
	AKAI		09, 23	SABA	13, 14, 22 to 24		3
	GRUNDIG		09, 17, 21	SONY	15, 16
	LOEWE		02	THOMSON	13, 14, 24
	PANASONIC		08, 23 to 27	TOSHIBA	07, 16 to 19, 21	4
	Result:	If your television is compatible with the remote control,
		it will switch off. It is now programmed to operate with				4
		the remote control.
	➢ If several codes are indicated for your television brand, try
	each one in turn until you find one that works.
	☛ When you change the batteries in the remote control, you					5
	must reprogramme the code, following the same
	procedure.
You can then control the television using the following buttons.						5
Button			Function
							6

TV STANDBY/ON ➀ Used to switch the television on and off.

TV or VCR ➁	Used to switch between the TV and VCR
	modes.
INPUT SEL. ➂	Used to select an external source.
VOL + or – ➃	Used to adjust the volume of the television.
PROG/TRK ➄	Used to select the required programme.
( or )
TV MUTE ➅	Used to mute the volume of the television.

➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.

45