GB
39
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index”
is automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on
the direction selected, the indexes are numbered as follows:
➢This DVD-VCR uses a standard indexing system
(VISS).
As a result, it will recognize any indexes marked by
other VCRs using the same system and vice versa.
Go to [0:00:00] Stop
Use this feature when you want to search for the [0:00:00] counter
position on a cassette. Press the CLEAR button at the point on the tape
where you want to set the counter to [0:00:00].
The VCR will rewind or fast forward, searching for the [0:00:00]
counter position, and then automatically stop at that position.
1After pressing the SEARCH, press the corresponding
#
or
❷
buttons, until the Go To [0:00:00] option is selected.
2Press the OK or
❿
.
End Search
Use this feature when you want to search for a blank position to
record a program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the
tape during end search, the tape will be ejected.
1After pressing the SEARCH, press the corresponding
#
or
❷
buttons, until the End Search option is selected.
2Press the OK or
❿
.
21 12
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq. etc.
VCR