Samsung CLP-300 XSG manual Parts for Maintenance and Repair, Items Pages Printed Part number

Disassembly and Reassembly

5.2 Parts for Maintenance and Repair

5.2.1 Replacement interval for parts with a limited life

Some of the parts in this printer have a limited life, shorter than that of the whole machine. These parts must be replaced periodically.

The table below shows the interval at which these parts should be replaced.

The table shows the life of each part, and is measured when using A4 paper. When servicing a machine always check the status of these parts using the control panel and ensure that parts are replaced at the appropriate times otherwise a general degradation in print quality will occur.

Item(s)		Pages Printed				Part number
Black toner cartridge	Approx.	1,500 pages		*		CLP-K300A
Color toner cartridge	Approx.	700 pages	*			CLP-C300A:Cyan
						CLP-M300A:Magenta
						CLP-Y300A:Yellow
Imaging unit	Approx. 20,000 black pages or approx.				CLP-R300A
		12,500 color pages
Waste toner		Approx. 5,000 images **or Approx.				CLP-W300A
container	1,250 pages (fulll color ISO 19752 Standard image)
Pick-up roller		Approx. 50,000 pages				Contact a service
Fuser unit		Approx. 100,000 black pages				representative
		or 50,000 color pages
T2 roller		Approx. 100,000 pages
ITB		Approx. 60,000 black pages
		or 25,000 color pages

*Average A4-/letter-sized page count based on ISO 19752 Standard coverage of individual colors on each page. Usage conditions and print patterns may cause results to vary.

**Image counts based on one color on each page. If you print documents in full color (Cyan, Magenta, Yellow, Black), the life of this item will be reduced by 25%.

	Service Manual	5-3
Samsung Electronics