Samsung DS660T manual NectingtheVideoOutto TV, Broadcast System

nectingtheVideoOutto TV

ressive Scan) Function

ular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of

information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

Press and hold P.SCAN button on the remote control for over 5 seconds in stop

mode.

• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"

_¢orapm _d_

*Depending on your TV, Component Video input jacks may be marked as DVD Video input.

Composite Video (Good Quality)

Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television.

S-Video (Better Quality)

If you television is equipped with an S-Video input, connect an S-Video cable (not supplied) from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on your television.

repetitively.

Interlaced Scan (1 FRAME = 2 FIELDS)

%

mB

In interlaced-scan video, a frame consists of two intedaced fields (odd and even), where each field contains every other horizontal line in the frame, The odd field of alternating lines is displayed first, and then the even field is displayed to fill ]n the alternating gaps left by the odd field to form a single frame.

One frame, displayed every 1/30th of a second, contains two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second.

The intedaced scanning method is intended for capturing a still object.

Progressive Scan (FULL FRAME)

The progressive scanning method scans one full frame of video consecutively down the screen, line by line.

An entire image is drawn at one time, as opposed to the interlaced scanning process by which a video image is drawn in a series of passes.

The progressive scanning method is desirable for dealing with moving objects.

Component Video (Best Quality)

If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.

•When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed any signal. See page 16 to select Progressive Scan.

•This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.)

•Depending on the brand and modeI of your TV, this function may not work.

Broadcast System

•This device is designed to work with the NTSC video format.

•For normal playback, the video format a DVD disc is recorded in must coincide with your TV's video format.

15 1G