ngExternalComponents
Example: Digital signal components such as a Settop Box or CD Recorder.
f
Example: Analog signal components such as a VCR or TV.
@
Audio Cable 1
Video CableIftheexternatanalog /
componenthasonlyone/
AudioOut,connect
eitherleftorright.
1 Connect Video Out on the DVD player to Video In on the TV.
2 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
3 Press AUX on the remote control to select 'DIGITALIN'.
•Eachtimethebattenis pressed,the selectionchangesas follows:DIGITAL IN _ AUX ] _ AUX 2.
•Youcanalso usethe FUNCTIONbattenonthe mainunit.
The modeswitchesas folIows:DVD/CD _ DIGITAL IN , AUX] _ AUX2 _ FM , AM.
1
2
3
4
Connect Video Out on the DVD player to Video In on the TV.
Connect Video In on the DVD player to Video Out on the external analog component.
Connect Audio In on the DVD player to Audio Out on the external analog component.
• Be sure to match connector colors.
Press AUX on the remote control to select AUX 1 or
AUX 2.
•Each time the button is pressed, the selection changes as follows: DIGITAL IN _AUX 1 _ AUX2.
•You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD _ DIGITAL IN
AUXI _ AUX2 _FM _ AM.
•if you have connected an external digital component and also an Analog component to Video In (1, 2) at the same time, there will be video from AUX 1 even when you select DIGITAL IN.
•if you have connected Audio in (L, R) to 1, connect Video In to 1 as well, and if you have connected Audio In (L, R) to 2, connect Video In to 2 also.
•When you select Aux 1 or 2, you are selecting Video 1 or 2 inputs respectively.
17 | 18 |
