Samsung DVD-R129/XEH, DVD-R129/EUR manual Plug & Auto Setup, Connect the RF cable as indicated on

Plug & Auto Setup

Your DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD Recorder will then be ready for use.

1 Connect the RF cable as indicated on page

18.

(Connecting Your DVD Recorder to the TV Using the RF Cable and scart cable.)

2 Plug the DVD Recorder into the mains.

“Auto” in the front panel display flickers.

• Refer to following abbreviation table when selecting “Country”.

A(Austria)	NL(Netherlands)	S(Sweden)	PL(Poland)
B(Belgium)	I(Italy)	CH(Swiss)	CZ (Czech)
DK(Denmark)	N(Norway)	TR(Turkey)	Others
FIN(Finland)	P(Portugal)	GR(Greece)
D(Deutschland)	E(Spain)	HU(Hungary)

•The DVD Recorder searches for the stations according to a preset preference list corresponding to the country that you have selected.

6 Auto Channel scan will be started.

Auto channel memory

17%

Stop

•The number of stations automatically stored by the DVD Recorder depends on the number of stations that it has found.

System Setup

3 Select the language using the …† buttons, then press the OK button.

DVD-Recorder		Auto Setup
No Disc
Language Set		English
		Français
		Deutsch
		Español
		Italiano
		Nederlands
MOVE	OK	RETURN

4 Press the OK button or wait for a few seconds to start the auto setup.

DVD-Recorder Auto Setup

No Disc

Auto setup will be started.

Check antenna and TV cable connection.

OK RETURN

5 Select “Country” using the …†œ √ buttons to select your country then press the OK button.

DVD-Recorder			Auto Setup
	Country Selection
A	NL	S	PL
B	I	Instal CH	CZ
DK	N	TR	Others
FIN	P	GR
D	E	HU
MOVE	OK	RETURN

7 Check the date and time.

DVD-Recorder			Auto Setup
No Disc
Date		Time	Auto Clock
JAN	01	2006 12	00 On
SUN
MOVE	OK	RETURN

•if it is : Correct, press the OK button then the date and time will be saved. If you don't press the OK button, the date and time will be saved automatically after 5 seconds.

•if it is : Incorrect, input correct Time, Date, Year using …†œ √ buttons or number buttons. Press the OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually.

(see page 26.)

■ Now, DVD Recorder is ready for use.

NOTE Function for “Plug & Auto Setup” is fixed already. So if you want to change this fixed one, you can change it by Presetting the Stations in OSD “Presetting Channels with the Manual set up function” menu.

(see page 28)

■Auto Setup function can be performed by

pressing and holding down the PROG ( ) buttons on the front panel of the DVD Recorder simultaneously for more than 5 seconds with no disc in the DVD Recorder.

English -25