Using the device

1

2

3

 Level Link  Slide the Mode switch to the right to activate sending mode.

 Level Link  Press and hold the Multifunction button for about 3 seconds to enter Bluetooth pairing mode.

 Level Link  Place your Level Link within 30 cm of the paired audio device.

The Level Link and the audio device are now connected via Bluetooth. If the connection fails, turn off the audio device and turn it on again. Then, repeat the steps above.

4 Plug the audio cable into the audio jack of the Level Link. Then, plug the other end of the audio cable into the audio output jack of the multimedia player.

•The method for connecting via Bluetooth may vary depending on the connected

devices. For more information, refer to the user manual of the connected device.

•When the Level Link is connected to a TV in sending mode, lipsync problems may occur. It is recommended to connect the Level Link to a TV that supports the aptX low-latency codec.

•When using the Level Link with a multimedia player, turn down the multimedia player’s volume before unplugging the audio cable to prevent sudden, loud sounds.

•You may experience drops in volume or noise depending on the connected multimedia player’s volume. To avoid this, appropriately adjust the multimedia player’s sound.

English(USA)

13

11