![](/images/new-backgrounds/1245610/24561083x1.webp)
My Camera > Accessories
Connecting the flash
1Remove the
2Mount the flash by sliding it into the
•To release the flash, gently pull the flash while you press the PUSH button.
3Press the power button on the flash.
•You can capture a photo with a flash that is not fully charged, but it is
recommended to use a fully charged flash.
•Refer to the optional accessories page for available external flashes. (p. 177)
•The available options may differ depending on the shooting mode.
•There is an interval between two bursts of the flash. Do not move until the flash fires a second time.
•For more details about optional flashes, refer to the user manual for the flash.
Use only
41