Your New Wide TV
Rear Panel Jacks
ŒVIDEO/AUDIO INPUT jacks
Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to pages 19, 22, and 24)
´
Connects an
ˇVIDEO/AUDIO OUTPUT jacks
Sends video/audio signals from the TV to an external source, such as a VCR. These jacks are available only in TV, Video and
¨COMPONENT IN 1, 2 jacks (Y, PB, PR, AUDIO L/R) Use these jacks to connect the component video/audio signals from a DVD player or a
ˆPC VIDEO INPUT jack
Connect to the video output jack on your PC.
ØPC AUDIO INPUT jack
Connect to the audio output jack on your PC. (Refer to page 100)
∏HDMI (High Definition Multimedia Interface) INPUT jacks (HDMI IN 2)
Connect to the HDMI jack of a device with HDMI output.
”HDMI (High Definition Multimedia Interface)/ DVI INPUT jack (HDMI IN 1/DVI IN)
Connect to the HDMI jack of a device with HDMI output.
This input can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device.
(Not compatible with PC) (Refer to pages 21 and 23)
’DVI AUDIO (L/R) IN
Connect to the DVI audio output jack of an external device. (Refer to page 23)
˝DIGITAL AUDIO OUT (OPTICAL) jack
Connect to a Digital Audio Component. (Refer to page 25)
ÔRS232C
For service only.
SERVICE
This jack is for service only.
ÒANTENNA terminals
Two independent cables or antennas can be connected to
these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)” terminals to receive a signal from VHF/UHF antennas or your cable system. (Refer to pages 16~18)
ÚPOWER IN
Connect the supplied power cord.
English - 12
