Samsung HL-S6167W, HL-S6767W manual Viewing an External Signal Source, Setting the Signal Source

Input

Return

Source List

Edit Name

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).

Setting the Signal Source

1 Press the MENU button.

Press the ENTER button to select “Input”.

TV

Input

Enter

Press the … or † button to select		Source List
		Return
2 “Source List”, then press the ENTER
		TV	√
button.		AV1	----
		AV2	----
Press the … or † button to select a
		AV3	----
signal source, then press the ENTER
		S-Video1	----
button.		S-Video2	----
		S-Video3	----
		Component1	----
• When you connect equipment to	† Component2		----

the TV, you can choose between	Input
the following sets of jacks:	Enter
“AV1”, “AV2”, “S-VIDEO1”,

“S-VIDEO2”, “COMPONENT1”, “COMPONENT2”, “PC”, “HDMI1”, or “HDMI2” on the TV’s rear panel and “AV3”, or “S-VIDEO3” on the TV’s side panel.

Alternate method

Press the SOURCE button on the	AV1
remote control repeatedly to
select an external signal source.

NOTES

•Only connected devices can be selected.

•Before selecting an input source, make sure the corresponding external device is connected first.

•HDMI input can be selected only when the external device is turned on and connected to the TV.

English - 45