Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently:

1Press the POWER button on the remote control.

The message Menu language, Shop Mode, Channels and Time will be set. is automatically displayed.

Press the ENTER button, then the message Select the language of the OSD. is displayed.

2Press the ◄ or ► button to select a language, then press the ENTER button.

3Press the ◄ or ► button to select Shop or Home, then press the ENTER button.

➢The default selection is Home.

➢We recommend setting the TV to Home mode for the best picture in your home environment.

➢Shop mode is only intended for use in retail environments.

➢If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the TV panel.

4Press the ◄ or ► button to memorize the channels of the selected connection, then press the ENTER button.

➢If the antenna is connected to ANT 1 IN (CABLE), select Cable and if it is connected to ANT 2 IN (AIR), select Air.

➢If both ANT 1 IN (CABLE) and ANT 2 IN (AIR) are connected, select the Air+Cable.

➢In Cable mode, you can select the correct analog signal source among STD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTER button. If you have Digital cable, select the signal source for both Analog and Digital.

Contact your local cable company to identify the type of cable system that exists in your particular area.

5The TV will begin memorizing all of the available channels.

After all the available channels are stored, the Auto program menu reappears. Press the ENTER button when channel memorization is complete.

The message Set the Clock Mode. is displayed.

➢ To stop the search before it has finished, press the ENTER button with stop selected.

6Press the ◄ or ► button to select Manual for setting the current time manually, then press the ENTER button. The message Enter the current date and time. is displayed.

➢If you select Auto, Set to daylight saving time. is displayed, then go to step 9. (If you want to set the time automatically, skip to step 9.)

7Press the ◄ or ► button to move to Month, Day, Year, Hour, or Min.

Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER button.

➢You can set the month, day, year, hour, and minute directly by pressing the number buttons on the remote control.

8The message Enjoy your watching. is displayed. When you have finished, press the ENTER button.

➢Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.

Plug & Play

Menu language, Shop Mode, Channels and Time will be set.

Start

Enter Exit

Plug & Play

Select the language of the OSD.

English Español Français

Enter Skip

Plug & Play

Select Home Mode when installing this TV at home.

Shop Home

			Enter	Skip
Plug & Play
Select the antennas to memorize
Air		Cable	Air+Cable
			Enter	Skip
Plug & Play
Selects the cable system.
Analog	STD	HRC		IRC
Digital	STD	HRC		IRC
			Enter	Skip
Plug & Play
Auto Program in Progress.			Cable 3
			Cable 3
			10%
		Stop
		Enter		Skip