Samsung HT-J7750W/XE TV Aspect Ratio, BD Wise, Resolution, DVD 24 fps Conversion, Fit Screen Size

TV Aspect Ratio

Lets you adjust the output of the product to the screen size of your TV. (See page 51)

BD Wise

BD Wise is Samsung’s latest inter-connectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu- ray/DVD Disc.

Resolution

Lets you set the output resolution of the HDMI video signal to BD Wise, Auto, 1080p, 1080i, 720p, 576p/480p. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively.

The more lines, the higher quality.

Movie Frame (24 fps)

Setting the Movie Frame (24 fps) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24 fps compatible TV.

●●You can enjoy the Movie Frame (24 fps) feature only on a TV supporting this frame rate.

●●Movie Frame is only available when the product is in the HDMI 1080p output resolution modes.

DVD 24 fps Conversion

Converts DVD playback to 24 frames per second and outputs it via HDMI. This option is only available when Movie Frame (24 fps) is set to Auto.

✎✎This feature applies to NTSC discs only.

Fit Screen Size

Lets you select the optimal size for the Smart Hub or Screen Mirroring Screen.

HDMI Colour Format

Lets you set the colour space format for the HDMI output to match the capabilities of the connected device (TV, monitor, etc).

HDMI Deep Colour

Lets you set the product to output video from the HDMI OUT jack with Deep Colour. Deep Colour provides more accurate colour reproduction with greater colour depth.

Progressive Mode

Lets you improve picture quality when viewing DVDs.

Sound

Simple Speaker Setup (HT-J7500W only)

Lets you configure the settings of the speakers you have connected to obtain the best possible surround sound.

Normal Mode : Select if you have set up your speakers in the recommended speaker layout with the surround speakers next to or behind the listening positions.

Simple Mode : Select if you have put your surround speakers in front of the listening position. Downmixes the front sound to the surround sound speakers.

✎✎SFE, Virtual 7.1 will not operate when the

Simple Mode is on.

Speaker Settings

Sound Output : Lets you select which speakers are active, either the TV's speakers or the home cinema's speakers.

Settings (Home theatre speakers) : Lets you adjust the following speaker settings and turn the test tone on and off so you can test the

speakers.

-- Volume Level : Lets you adjust the relative loudness of each speaker from 6dB to -6dB. For example, if you like deep bass, you can increase the loudness of the

subwoofer by 6dB.

-- Distance : Lets you adjust the relative distance of each speaker from the listening position up to 9 meters. The farther the

distance, the louder the speaker will be. -- Speaker Test : Begins a test to set the best surround sound configuration. Press Stop Test to stop the test while it is in progress.

Settings

17 - English