Samsung HZ50W manual How to charge the rechargeable battery

Connecting to a Power Source

Important information about USB cable usage. Use a USB cable with the correct speci cation.

Do not connect the camera to a PC through a USB hub. Connect the camera directly to the PC.

Do not connect the camera and other devices to a PC at the same time. Connect the camera by itself.

If your PC can not detect the camera when you use the front side USB port, use the back side USB port of computer.

If the USB port of the PC doesn’t meet the Power output standard (5V, 500mA), the battery may not charge.

Before inserting any cables or the AC adapter, make sure the direction of the cable or adapter plug is correct. Do not insert by force. It may cause breakage of cable or camera.

If the charging LED of the AC Charger does not turn on or blink after you have inserted the rechargeable battery, please make sure the battery is inserted correctly.

If you charge the battery with the camera power on, the battery won’t be fully charged. Turn the camera off while charging the battery to get a full charge.

	Charging LED of the AC charger
How to charge the rechargeable battery		Charging LED
	Being Charged	Red LED is on
	Charging is complete	Green LED is on
	Charging error	Orange LED is off or blinking

If you insert a fully discharged battery to charge it, do not turn on the camera at the same time. The camera must not be turned on because of the low battery capacity. Charge the battery for more than 10 minutes before using the camera.

Do not use the flash frequently or take a movie clip with the fully discharged battery charged only for a short time. Even if the charger is inserted, the camera power may turn off because the rechargeable battery has discharged again.

014