Samsung HZ50W manual Selecting Video out type, Setting the USB

Settings ( )

Selecting Video out type

The Video output signal from the camera can be NTSC or PAL. Your choice of output is governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.

- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc. .

- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway etc. .

- When using a TV as an external screen, you need to select the

external or AV channel of the TV.

- There may be digital noise on the external screen, but it is not a

Connecting to an external screen

When you connect the camera to an ex- ternal monitor, the images and menus on the camera’s LCD screen will be visible on the external screen.

Auto Power Off	:3 min
AF Lamp	:On
Anynet+ (HDMI-CEC)	:On
HDMI Size	:1080i
Video Out	:NTSC
	NTSC
USB	PAL:Auto

malfunction.

- If the image is not in the center of the screen, use the TV controls

to center it.

- When you connect the camera to an external screen, the screen

may not display some parts of some images.

- When you connect the camera to an external screen, the camera’s

menu is displayed on the external screen. The functions displayed

BackSet

on the screen are the same as those on the camera’s LCD screen.

Yellow - Video White - Sound

Setting the USB

If the camera has failed to connect automatically with a PC or a printer through a USB cable, you can manually set [Computer] or [Printer].

-[USB] sub menus:
[Auto]*	: Automatically enables an	Auto Power Off	:3 min
	external device connected with	AF Lamp	:On
	a USB cable.	Anynet+ (HDMI-CEC)	:On
		HDMI Size	:1080i
[Computer] : Sets computer connection
		Video Out	Auto:NTSC
	mode if the camera does not	USB	Computer
			:Auto
			Printer
	recognize a connected
		Back	Set
	computer automatically.
[Printer]	: Sets the Printer connection mode if the the camera does
	not recognize a connected printer automatically.

073