Samsung HZ50W Auto Focus type, Setting AEB Exposure Ranges AEB Area, A focus frame will appear

Shooting ( )

High resolution and picture quality increases file saving time, which increases stand-by time.

If you select the [Continuous], [High-speed], [Motion Capture], or [AEB] sub menu, the camera turns the flash off automatically.

Auto Focus type

You can select your preferred Focus Area according to the shooting conditions.

If the memory has space for less than 3 pictures, the AEB shooting is not available.

It is best to use a tripod for the AEB shooting. The time the camera takes to save each image file is longer and blurring caused by camera shake may occur.

[Center AF] ( ) : The camera focuses using the rectangular area in the center of the LCD screen.

[Multi AF] ( ) : The camera focuses by selecting all the available AF points from the 9 AF points.

Focus Area

BackMove

Setting AEB Exposure Ranges (AEB Area)

You can set exposure ranges and intervals for the three AEB mode photos.

[Selection AF] ( ) : Focus on a desired position on the LCD screen.

[Tracking AF] ( ) : The focus moves along with the movements of a subject.

ÄWhen the camera focuses on a subject, the auto focus frame turns

green. When the camera doesn't focus on the subject, the auto

-Set a standard for the exposure bracket by pressing the LEFT/RIGHT buttons.

-Set a range for the left and right exposure bracket by using the Smart Dial.

-2 -1 0 +1 +2

AEB Area

focus frame turns red.

ŶHow to Enable Selection AF

1. After setting [Selection AF], press the OK

button. The screen for setting the location

BackMove

	of a focus frame will appear.
2.	Press the Up/Down/Left/Right button to
	move the focus mark to the desired position.
3.	Press the shutter button to enable Selection
	AF. Once setting is complete, the focus
	mark will be fixed at the position you set.

Move Set

Focus Mark

056