2Using the Software
2.6Using IGEL OS - "Devices"
2.6.1 USB Storage Devices
Menu path: Setup 
Devices 
Storage Devices
USB storage devices can be configured here.
Hotplug storage devices
Menu path: Setup 
Devices 
Storage Devices 
Storage Hotplug
In this area, you can set up the connection for hotplug storage devices. These can be, for example, USB mass storage devices or MMC card readers.
You can change the following settings:
Default permission: Default access permissions for hotplug storage devices. Possible values:
Read/Write
Read only
Enable dynamic client drive mapping. If this option is enabled, hotplug storage devices are automatically added and removed during ICA sessions and RDP sessions.
Before you mechanically disconnect the hotplug storage device from the thin client, safely remove it. To do this, click on [ 
] in the taskbar.
If the following warning is shown, "The device is still in use! Do NOT disconnect the device.", the hotplug storage device must not be removed.
Close either the named program or all open files or directories within a session located on the hotplug storage device.
2 Using the Software 45
