4Screen Adjustment

1Press the button to select Zoom/Position.

2Select the Zoom or Position.

3Press the [] button.

4Press the /// button to move the picture.

5Press the [] button.

6Select Close by pressing the and buttons sequentially.

If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.

The picture will be set to its default position.

4.3.3 4:3 Screen Size

Available only when picture size is set to Auto Wide.

You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.

Not available in PC, Component or HDMI mode.

4.3.4PC Screen Adjustment

Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the centre of screen.

Position: To adjust the PC’s screen position if it is not centred or does not fit the product screen. Press the or button to adjust the Vertical Position. Press the or button to adjust the Horizontal Position.

Image Reset: Resets the image to the default settings.

This option is available when the input source is PC.

4.3.5Resolution Select

If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu.

Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768

This option is available when the input source is PC.

4 Screen Adjustment 121