Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
Press the down arrow key to go to the Subnet Mask fields, and then press [
].
When done entering the IP Address, press [
].
9
10
11
12 When done, select OK at the bottom of the page, and then press [ ]. The network test screen appears and the verification process starts. When the connection has been verified, the “Internet is connected successfully.” message appears.
If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time.

6Network

3On the dialog that appears, click the Support tab.

4On the Support Tab, click the Details button. The Network connection values are displayed.

How to set up manually

To set up your product cable network connection manually, follow these steps.

1Go to the Network Settings screen.

2Select Start, press [], and then press [] again. The network test screen appears and the verification process starts.

3Press []. The verification process stops. Select IP Settings on network connection screen. The IP Settings screen appears.

4Select the field at the top, press [], and then set IP Settings to Enter manually.

5Press the button on your remote to go to the IP Address entry field, and then press [].

6Enter the first portion of the IP Address (for example, 105) into the first entry field using the number keys on your remote. Press the right arrow button to go to the next field.

7Enter the next portion of the IP Address. Press the right arrow button to go to the next field.

8Repeat the entry process for each field in the IP Address.

6 Network 137