3Using MDC

3.2MDC Programme Installation/Uninstallation

3.2.1 Installation

1Insert the installation CD into the CD-ROM drive.

2Click the MDC Unified installation programme.

If a software installation window is not displayed on the main screen, install with the MDC Unified

execution file in the MDC folder on the CD.

3Select a language for installation. Next, click "OK".

4When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".

5In the "Licence Agreement" window displayed, select "I accept the terms in the licence agreement" and click "Next".

6In the displayed "Customer Information" window, fill out all the information fields and click "Next".

7In the displayed "Destination Folder" window, select the directory path you want to install the programme in and click "Next".

If the directory path is not specified, the programme will be installed in the default directory path.

8In the displayed "Ready to Install the Programme" window, check the directory path to install the programme in and click "Install".

9

10

11

Installation progress will be displayed.

Click "Finish" in the displayed "InstallShield Wizard Complete" window.

Select "Launch MDC Unified" and click "Finish" to run the MDC programme immediately.

The MDC Unified shortcut icon will be created on the desktop after installation.

The MDC execution icon may not be displayed depending on the PC system or product specifications.

Press F5 if the execution icon is not displayed.

3.2.2 Uninstallation

1

2

Select Settings > Control Panel on the Start menu and double-click Add/Delete Programme.

Select MDC Unified from the list and click Change/Remove.

MDC installation can be affected by the graphics card, mother board and network conditions.

3 Using MDC 75