Go to Network Setting screen.
6.1.5 WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
Press the
button to go to the Subnet Mask fields, and then press [
].
When done entering the IP Address, press [
].
14
15
16
17 When done, select OK at the bottom of the page, and then press [ ]. The network connection screen appears and the verification process starts. When the connection has been verified, the “Your wireless network and Internet connection are setup and ready to use.” message appears.
Network
12 Enter the next portion of the IP Address. Press the button to go to the next field.
13 Repeat the entry process for each field in the IP Address.
If you make a mistake when entering a number, re-enter the number to correct it. You can also press the or button to change the number one unit at a time.

6

1

2

3

4

Select Start, press [], and then press [] again.

Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires all the network setting values it needs and connects to your network.

The network connection screen appears, and network setup is done.

6 Network 141