Samsung PE40C System, 7System

7System

Troubleshooting for Anynet+

Problem		Possible Solution
Anynet+ does not work.		Check if the device is an Anynet+ device. The Anynet+ system
		supports Anynet+ devices only.
	 Check if the Anynet+ device power cord is properly connected.
	 Check the Anynet+ device’s Video/Audio/HDMI cable
		connections.
	 Check whether Anynet+ (HDMI-CEC)is set to On in the Anynet+
		setup menu.
	 Check whether the remote control is Anynet+ compatible.
	 If you have removed and then reconnected the HDMI cable,
		please make sure to search devices again or turn your product off
		and on again.
	 Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.		Check if the Anynet+ device is properly connected to the product
		and check if the Anynet+ (HDMI-CEC)is set to On in the
		Anynet+ Setup menu.
	 Press the TOOLS button to display the Anynet+ menu and select
		a menu you want.
I want to exit Anynet+.		Select View PC in the Anynet+ menu.
	 Press the SOURCE button on the product remote control and
		select a non- Anynet+ device.
The message “Connecting to		You cannot use the remote control when you are configuring
Anynet+ device...” appears on		Anynet+ or switching to a view mode.
the screen.		Use the remote control after the product has completed Anynet+
		configuration or has finished switching to Anynet+.
The connected device is not		Check whether or not the device supports Anynet+ functions.
displayed.		Check whether or not the HDMI cable is properly connected.
	 Check whether Anynet+ (HDMI-CEC)is set to On in the Anynet+
		setup menu.
	 Search Anynet+ devices again.
	 Anynet+ requires an HDMI connection. Make sure the device is
		connected to your product with an HDMI cable.
	 Some HDMI cables may not support Anynet+ functions.
	 If the connection is terminated because there has been a power
		failure or the HDMI cable has been disconnected, please repeat
		the device scan.

7 System 164