Samsung LT32E390SX/XU manual Adjusting advanced settings

Adjusting advanced settings

(MENU/123) MENU Picture Advanced Settings Try Now

You can fine-tune how images are displayed on the TV screen for the Standard and Movie picture modes.

●● Dynamic Contrast Try Now

Automatically adjusts the screen contrast for an optimal contrast setting.

●● Black Tone Try Now

Adjusts the black colour depth.

●● Flesh Tone Try Now

Darkens or lightens skin tones.

●● RGB Only Mode Try Now

Adjusts the red, green, and blue levels individually.

●● Colour Space Try Now

Adjusts the range of colour that can be displayed on the screen.

––Auto: Automatically adjusts the colour space to match the input signal.

––Native: Applies a range of colours that is wider than the input signal.

––Custom: Allows you to adjust the colour space manually. Select a colour, and then change its Red, Green, and Blue saturations. Reset allows you to restore the default values for Colour Space.

"" You can configure the Colour function only when Colour Space is set to Custom.

●● White Balance Try Now

Adjusts the colour temperature of the picture to make white objects look white and the overall picture appear natural.

––2 Point: Allows you to adjust red, green, and blue luminosity with the offset menu and brightness with the gain menu. Reset allows you to restore the default values.

––10 Point: Divides red, green, and blue into 10 sections each, and allows you to modify the white balance by adjusting the brightness of each section. Level allows you to select the section to adjust.

"" You can use the 10 Point function only when Picture Mode is set to Movie. This function may not be supported by some external devices.

●● Gamma Try Now

Adjusts the primary colour intensity.

"" Advanced Settings is only available when Picture Mode is set to Standard or Movie.

"" White Balance and Gamma are only available when the TV is connected to a computer with an HDMI- to-DVI cable.