Setting up as an Anynet+ (HDMI-CEC)-enabled device
1.
2.
Press the SOURCE button on the remote control. On the Source screen, select the device and then press the button.
Select Anynet+
"" The menu options available in the
●● Anynet+ (HDMI-CEC)
Sets up the selected device as an Anynet+
Read before connecting an Anynet+ (HDMI-CEC)
"" You can configure the TV's universal remote control to control
"" Anynet+ cannot be used to control external devices that do not support
"" Anynet+ devices must be connected to the TV with an HDMI cable. Note that some HDMI cables may not support Anynet+
"" The TV remote control may not work under certain circumstances. If this occurs, select the Anynet+ device again.
"" Anynet+
"" Anynet+
"" To listen to
"" A home theatre system that has been connected to the TV with an HDMI cable and an optical cable only supports