Anynet+ (HDMI-CEC) Isn't Working
The problem
Try this!
| Confirm that the device is an Anynet+ device. The Anynet+ system supports | ||||
| Anynet+ devices only. |
|
|
| |
| Check if the power cord of the Anynet+ device is properly connected. | ||||
| Check the cable connections of the Anynet+ device. |
|
| ||
| Go to Anynet+ | MENU | System | Anynet+ (HDMI- | |
Anynet+ does not | CEC)) and see if Anynet+ |
| |||
work. | Check whether the TV remote control is in TV mode. |
|
| ||
| Check whether the remote control is Anynet+ compatible. |
| |||
| Anynet+ may not function when some other functions are active, including Channel | ||||
| Search, Smart Hub, Plug & Play, etc. |
|
|
| |
| If you have disconnected and then reconnected the HDMI cable, scan for devices | ||||
| again or turn your TV off and on. |
|
|
| |
|
| ||||
I want to start | Check if the Anynet+ device is properly connected to the TV, and then select the | ||||
Anynet+ | System Anynet+ | ||||
Anynet+. | |||||
menu to see if Anynet+ |
|
| |||
|
|
| |||
|
|
|
|
| |
I want to exit Anynet+. | Select View TV from the Anynet+ menu. |
|
|
| |
Select a |
|
| |||
|
|
| |||
|
|
|
|
| |
The message |
|
|
|
| |
"Connecting to | You cannot use the remote control when you are configuring Anynet+ or switching | ||||
Anynet+ device..." | |||||
to a viewing mode. Use the remote control after the TV has completed the Anynet+ | |||||
or "Disconnecting | |||||
configuration or has switched to a viewing mode. |
|
| |||
from Anynet+ device" |
|
| |||
|
|
|
| ||
appears on the screen. |
|
|
|
| |
|
|
|
|
| |
The Anynet+ device | You cannot use the play function when Setup is in progress. |
| |||
won't play. |
| ||||
|
|
|
| ||
|
|
|
| ||
| Check whether the device supports Anynet+. |
|
| ||
| Check whether the HDMI cable is properly connected. |
|
| ||
| Go to Anynet+ | MENU | System | Anynet+ (HDMI- | |
| CEC)) and see if Anynet+ |
| |||
The connected device | Scan for Anynet+ devices again. |
|
|
| |
is not displayed. | Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the | ||||
| device is connected to your TV with an HDMI cable. Some HDMI cables may not | ||||
| support Anynet+. |
|
|
| |
| If the connection is terminated because there has been a power failure or the HDMI | ||||
| cable has been disconnected, please scan for the device again. |
| |||
|
|
|
| ||
The TV audio is not | Connect an optical cable to the TV and the receiver. |
|
| ||
ARC enables the TV to output digital sound via the HDMI (ARC) port. | |||||
being played through | |||||
However, ARC is only available when the TV is connected to an audio receiver that | |||||
the receiver. | |||||
supports ARC. |
|
|
| ||
|
|
|
| ||
|
|
|
|
| |
