1
2
3
4
Oven use
Checking that your oven is operating correctly
The following simple procedure enables you to check that your oven is working correctly at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on the page 69-73.
NOTE
The oven must be plugged into anOpen the oven door by pulling the handle
appropriate wall socket. The turntable must on the upper side of the door.
be in position in the oven. If a power level Place a glass of water on the turntable.
other than the maximum (100 % - 900 W) is Close the door. used, the water takes longer to boil.
Press the START/+30s button and set the
time to 4 or 5 minutes, by pressing the
START/+30s button the appropriate number of times.
Result: The oven heats the water for 4 or 5 minutes. The water should then be boiling.
Setting the time
When power is supplied, “88:88” and then “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24-hour or 12-hour notation. You must set the clock:
Oven use
•When you first install your microwave oven
•After a power failure
24English
MC32J7035AK_EG_DE68-04334C-00_EN.indd 24
NOTE
Do not forget to reset the clock when you switch to and from summer and winter time.
1.Press the Multi Function Selector Dial.
2.Turn the Multi Function Selector Dial to set time display type. (12H or 24H)
3.Press the Multi Function Selector Dial to complete the setup.
4.Turn the Multi Function Selector Dial to set the hour.
