Samsung ML-1610 manual Software User’s Guide. Try printing a, Problem, Possible Cause, Solution

Problem	Possible Cause	Solution
The printer	The printer driver may	Reinstall the printer driver; see
does not print.	be incorrectly	Software User’s Guide. Try printing a
(continued)	installed.	demo page.
	The printer is	Check the LEDs on the control panel to
	malfunctioning.	determine if the printer is indicating a
		system error.
Paper does not	Paper has not been	Remove paper from the tray and reload it
feed into the	loaded correctly.	correctly.
printer.
	There is too much	Remove excess paper from the tray.
	paper in the tray.
	The paper is too thick.	Use only paper that meets the
		specifications required by the printer.
Print job is	The job may be very	Reduce the complexity of the page or try
extremely	complex.	adjusting the print quality settings.
slow.		The maximum print speed of the printer
		is 16(A4) or 17(Letter) pages per minute.
	If using Windows 98/	From the Start menu, choose Settings
	Me, the Spooling	and Printers. Right-click the your
	Setting may be set	printer icon, choose Properties, click
	incorrectly.	the Details tab, and then choose the
		Spool Settings button. Select the
		desired spool setting.
Half the page	The page layout is too	Simplify the page layout and remove any
is blank.	complex.	unnecessary graphics from the document.
	The page orientation	Change the page orientation in your
	setting may be	application.
	incorrect.
	The paper size and	Ensure that the paper size in the print
	the paper size settings	settings matches the paper in the tray.
	do not match.
The paper	There is too much	Remove excess paper from the tray.
keeps	paper in the paper	If printing on special materials, use the
jamming.	tray.	manual feed mode.
	An incorrect type of	Use only paper that meets the
	paper is being used.	specifications required by the printer.
	There may be debris	Open the front cover and remove the
	inside the machine.	debris.

5.4 SOLVING PROBLEMS