Using toner save mode

Toner save mode allows the printer to use less toner on each page. Activating this mode extends the life of your toner cartridge and reduces your cost per page beyond what one would experience in the normal mode, but it reduces print quality. This setting is not available with the 1200 dpi setting.

There are two ways to enable this mode:

Using the control panel button

Press Toner Save on the control panel. The printer must be in Standby mode; the Status LED lights green and Ready is shown on the display, if you use the ML-3051N or ML-3051ND.

If the button backlight is on, the mode is enabled and the printer uses less toner to print a page.

If the button backlight is off, the mode is disabled and the printer prints in normal mode.

From the software application

You can set toner save mode from the printer properties window on your printer driver. See the Software Section.

2.7 <System setup>

Page 20
Image 20
Samsung ML-3050 manual Using toner save mode, Using the control panel button, From the software application