Samsung ML-4050N manual Using the hard disk, Installing the hard disk, Setting Encryption

Setting Encryption

If your network uses WEP encryption keys, you can must select the appropriate encryption type and configure encryption keys. You can configure up to four keys. The active key must match the key value and key position (for example, Key 1) configured on other wireless devices in the network.

1Press Menu until Network appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Wireless appears and press OK.

3Press the Scroll buttons until WLAN Security appears and press OK.

4Press the Scroll buttons until Static WEP appears and press OK.

5Press the Scroll buttons until Encryption appears and press OK.

Note

If you have set the authentication type to Open System, the Encryption menu does not display.

6Set each encryption option and press OK.

•Encrypt. Type: Select an encryption type: 64-bit WEP, or 128-bit WEP.

•Key Type: Select the key type of your network.

•Using Key: Select the key to be used in your network.

•Edit Key: Enter the key number for the selected key position. The numbers you can enter as follows:

	Hexadecimal	Alphanumeric
64-bit WEP	10 digits	5 characters
128-bit WEP	26 digits	13 characters

When you have finished, press Stop button to return to Standby mode.

Restoring default values for wireless networking

If the problem occurrs when you use or set up the wireless network values, take following stops to restore factory default values. Generally, factory values of wireless networking are optimized for your printer.

1Press Menu until Network appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Wireless appears and press OK.

3Press the Scroll buttons until WLAN Default appears and press OK.

4When Restore appears on the bottom line of the display, press OK. The printer starts restoring the default values.

Using the hard disk

Installing the hard disk allows the data from your computer to be sent to the print queue of the printer hard disk. This decreases the workload of the computer. You can also use various print features, such as storing a job in the hard disk, proofing a job, and printing private documents.

Installing the hard disk

For order information, see page 7.1.

Review the precautions on page 10.1.

1Turn the printer power off and unplug the power cord and printer cable from the printer.

2Remove the duplex-slot cover or the duplex unit from the back of the printer.

1

1 duplex-slot cover

3Grasp the control board cover and remove it.

10.5 <Installing accessories>