Samsung NL22B user manual Optimum Picture Quality and Afterimage Burn-in Prevention

Appendix

Correct disposal of batteries in this product

(Applicable in countries with separate collection systems)

The marking on the battery, manual or packaging indicates that the battery in this product should not be disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.

The battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. Do not attempt to remove the battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If you intend to discard the product, the waste collection site will take the appropriate measures for the recycling and treatment of the product, including the battery.

Optimum Picture Quality and Afterimage Burn-in Prevention

Optimum Picture Quality

•To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.

•Resolution: 1680 x 1050

•Vertical frequency (refresh rate): 56 ~ 85 Hz

•Due to the nature of the manufacturing of this product, approximately 1 pixel per million

(1ppm) may be brighter or darker on the panel. This does not affect product performance.

•The number of sub-pixels by panel type: 5,292,000

•Run “Auto Adjustment” to improve the picture quality. If noise is still found even after auto adjustment, adjust Coarse or Fine.

•Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

•Activate power-saving mode or a dynamic screen saver if you will not be using the product for an extended period of time.

•Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to only one resolution to obtain the optimum picture quality. Therefore, setting a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your monitor.

51