Samsung NQ50C7935ES/EU Filling the water tank, Lid and fill the water tank with cold water up to

Filling the water tank

You will see the water tank on the right-hand side. Only fill the tank with fresh tap water or with still bottled water. If your water is very hard, we recommend that you use softened water (see also “Water hardness”).

Caution	Do not fill the water tank with distilled water or any other
	liquids.

Fill the water tank before Push the steam door to open it. Lift the water tank over

each use	the interlock and pull the tank out of the appliance. Open
	the lid and fill the water tank with cold water up to the
	“Max” mark. If you use the measuring jug to fill the water
	tank, you don’t have to pull the water tank completely out
	of the appliance. Close the lid until you feel it engage.
	Slide the water tank back until it engages.

Empty the water tank after Pull the water tank out of the appliance slowly. Pulling it

each useout quickly may cause water to spill. Hold the water tank horizontally, so that no remaining water can drip out of the valve seat.

Empty out the water.

Thoroughly dry the water tank in the appliance and the seal in the lid.

“Fill water tank” display If the water tank is empty, a signal sounds.

A symbol appears in the display (see the below picture). The operation is interrupted.

1.Take out the water tank, fill to the “Max” mark and reinsert.

2.Press START.

English - 20

NQ50C7935ES_EU_DG68-00471E-01_EN.indb 20

2014-10-23 ￿￿ 12:02:22