ENGLISH

 

IEEE 1394 Data Transfer

IEEE 1394

Recording with a DV connection cable

 

1. Set the mode switch to TAPE.

2. Set the power switch to PLAYER mode.

3. Connect the DV cable (not supplied) from the DV IN/OUT port of the camcorder to the

DV IN/OUT port of the other DV device.

Make sure that DV appears on the screen.

4. Press the START/STOP button to begin REC PAUSE mode.

PAUSE is displayed on the OSD.

5.Start playback on the other DV device while you monitor the picture.

6. Press the START/STOP button to start recording.

If you want to pause recording momentarily, press the START/STOP button again.

7.To stop recording, press the

(STOP) button.

Notes

When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not be affected.

Operation is not guaranteed for all the recommended computer environments mentioned above.

1.

2.

3.

4.

5.

6.

7.

77

Page 77
Image 77
Samsung SC-D99 manual Recording with a DV connection cable