Taking a Photo Image Jpeg on a Memory Card

ENGLISH

中文

Digital Still Camera Mode (SC-DC173(U)/DC175/DC575 only) 数码相机模式(仅限SC-DC173(U)/DC175/DC575)

Taking a Photo Image (JPEG) on a Memory Card

You may take photo images while in M.Cam Mode and store the images on the Memory Card. page 26

You can take photo images using the remote control. (SC-DC175/DC575 only)

Audio will not be recorded with a photo image on to the Memory Card.

Please check the protection tab setting on your memory card before recording. You may not be able to record when it is set to lock.

可以在照片摄制模式下拍摄静止图像并将图像存储在记忆卡上。26页

可以使用遥控器拍照。(仅限SC-DC175/DC575)

声音将不随静止图像保存在记忆卡上。

录像前请检查记忆卡上的保护锁定设置。您可能无法在此锁定键设置为锁定时进行录像。

1. Insert the Memory Card. page 89	4

2.Set the [Mode] switch to [CARD].

4.After framing your subject, fully press the [PHOTO] button to take the picture.

The picture is taken and saved into the Memory Card within a few seconds.

Taking another picture within this interval is not possible.

The <Photo capture> indicator appears during the time it takes to save the image.

1.插入记忆卡。89页

2.设置模式[Mode]键到[CARD]。

3.设置电源[Power]键到摄录模式[ (Camera)]。

4.对被摄物体取景后，完全按下拍照[PHOTO]键拍照。

在保存图像所需的时间内，液晶显示屏上显示< 照片拍摄>图标。

注意

Notes

Saved photo images will appear slightly larger than what is shown on the LCD screen when the photos are taken.

Photo images are saved in the Memory Card in an 800x600 or 1152x864 (SC-DC575 only) format.

The number of photo images that can be stored depends on the quality of the image.

Photo capture

已保存的照片看起来要比拍照时显示在 LCD 屏幕上的照片稍大一点。

照片图像以 800x600 或 1152x864（仅限SC-DC575）

格式保存在存储卡中。

可存储静止图像的数量取决于图像质量。