ENGLISH

中 文

USB Interface (SC-DC173(U)/DC175/DC575 only) USB接口(仅限SC-DC173(U)/DC175/DC575)

Connecting to a PC

1.Connect a USB cable to the USB jack on the PC.

2.Connect the other end of the USB cable into the USB jack on the DVD Camcorder. (USB jack)

If a PC is connected to the DVD Camcorder with a USB cable, only [Power] switch, [Mode] switch, [Zoom] lever can be operated.

连接至PC

1. USB线接到PC机上的USB接口

上。

2. USB电缆的另一端连接至DVD 摄像机上的USB插孔。

若使用USB电缆将计算机 连接至DVD摄像机,只有

[Power]转换器、[Mode]

换器、[Zoom]杆可以操作。

Disconnecting the USB Cable

After completing the data transmission, you must disconnect the cable in the following way:

1.Select the removable disc icon and click the right mouse button to select “Eject”.

2.Select “Confirm” and disconnect the USB cable when the Windows Splash screen appears.

Notes

If you disconnect the USB cable from the PC or the DVD Camcorder while transferring, the data transmission will stop and the data may be damaged.

If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the DVD Camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the DVD Camcorder.

You should set the USB Connect to Computer to connect to a PC via USB cable. page 109

断开USB连线

数据传输完成后,您必须按照下列步骤断开连线:

1.选择移动硬盘图标并点击鼠标右键选择弹仓

2.当屏幕显示视窗窗口时,选择确认,并断开USB连线。

注意

若在数据传输期间从计算机或DVD摄像机拔下USB电缆,数据传输将会停止 且数据可能会损坏。

若通过USB集线器将USB电缆连接至计算机,或同时将USB电缆连接其他设 备,DVD摄像机可能无法正确操作。若发生此情形,请从计算机卸下所有 USB设备然后重新连接DVD摄像机。

应该将 USB 连接设置为 计算机以便通过 USB 电缆连接至 PC109

112

Page 112
Image 112
Samsung SC-DC173U, SC-DC175 manual Connecting to a PC, 连接至pc机, 112, 换器、Zoom杆可以操作。, Disconnecting the USB Cable