Using SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time.
• You can only use SetIP program when your machine is connected to a network.
•The following procedure is based on the Windows XP operating system.
•If you are in a
Installing the program
1.Insert the driver CD provided along with your machine. When the driver CD runs automatically, close the window.
2.Start Windows Explorer and open the X drive. (X represents your CD- ROM drive.)
3.Double click Application > SetIP.
4.Open the folder of the language you plan to use.
5.Double click Setup.exe to install this program.
6.Follow the instruction on the window to complete the installation.
Starting the program
1.Print the machine's network information report which includes your machine’s MAC address. See "Printing reports" on page 57.
2.From the Windows Start menu, select All Programs > Samsung Network Printer Utilities > SetIP > SetIP.
3.Click
in the SetIP window to open the TCP/IP configuration window.
4.Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
When you enter the MAC address, enter it without colon(:).
5.Click OK, then the machine prints the network information. Confirm all the settings are correct.
6.Click Exit to close the SetIP program.
INSTALLING THE SOFTWARE
You have to install the machine software for printing. The software includes drivers, applications, and other user friendly programs.
• The following procedure is for when the machine is being used as a network machine. If you want to connect a machine with a USB cable, refer to Software section.
•The following procedure is based on the Windows XP operating system. The procedure and popup window which appear during the installation may differ depending on the operating system, the printer feature, or the interface in use.
1.Make sure that the network setup for your machine is completed. (See "Setting up the network" on page 24.) All applications should be closed on your computer before beginning installation.
2.Insert the Printer Software
If the installation window does not appear, click Start > Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
If you use Windows vista, Windows 7 and Windows Server 2008 R2, click Start > All Programs > Accessories > Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows vista, Windows 7 and Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.
3.Click Next.
•If necessary, select a language from the
Getting started_ 25
