Understanding the Status LED, Off, Red Blinking | Samsung SCX4826FN

UNDERSTANDING THE STATUS LED

The color of the Status LED indicates the machine's current status.

STATUS		DESCRIPTION

Off		• The machine is powered off-line.
		• The machine is in power save mode. When
		data is received, or any button is pressed, it
		switches to on-line automatically.

Green	Blinking	• When the green LED slowly blinks, the
		machine is receiving data from the computer.
		• When the green LED rapidly blinks, the
		machine is printing data.
	On	• The machine is powered on and can be used.

Red	Blinking	• A minor error has occurred and the machine is
		waiting for the error to be cleared. Check the
		display message, and solve the problem
		referring to "Understanding display
		messages" on page 68.
		• Small amount of toner is left in the cartridge.
		The estimated cartridge lifea of toner is close.
		Prepare a new cartridge for replacement. You
		may temporarily increase the printing quality
		by redistributing the toner. (See
		"Redistributing toner" on page 60.)

	On	• A problem has occurred such as a paper jam,
		cover opened or no paper in the tray, so that
		the machine cannot continue the job. Check
		the message on the display, and refer to
		"Understanding display messages" on
		page 68 to solve the problem.
		• A toner cartridge has almost reached its
		estimated cartridge lifea. It is recommended to
		replace the toner cartridge. (See "Replacing
		the toner cartridge" on page 61.)

a.Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/OEC 19752. (See "General specifications" on page 81.) The number of pages may be affected by operating environment, printing interval, media type, and media size. Some amount of toner may remain in the cartridge even when "Toner Exhausted " appears and the printer stops printing.

Always check the message on the display to solve the problem. The instruction in the Troubleshooting section will guide you to operate the machine properly. See "Understanding display messages" on page 68 for more information.

Introduction_ 19

Image 19

Samsung SCX4826FN, SCX-4x26 manual Understanding the Status LED, Status Description, Off, Green Blinking, Red Blinking

Contents

Multi Functional Printer Special Features Features of your new laser product Convention Description Example Features by ModelsFeatures About this USER’S Guide Printer Driver Help Quick Install GuideFinding More Information Online User’s Guide Important Safety Symbols and Precautions Safety informationWhat the icons and signs in this user’s guide mean Laser Safety Statement Perchlorate Warning Ozone SafetyMercury Safety Power Saver FCC Information to the User Correct Disposal of Batteries in this ProductRadio Frequency Emissions FAX Branding You should also know that Ringer Equivalence Number EC Certification Replacing the Fitted Plug for UK onlyDeclaration of Conformity European Countries Approvals and Certifications Original Ssleay License Openssl License 12Safety information Contents Other ways to fax Printing a document Canceling a print job Sending a faxScanning by a network connection Receiving a fax Printing from a USB memory device Fax setupCleaning your machine Maintenance parts Supplies Understanding display messages Solving other problems This chapter includes IntroductionPrinter Overview Front view Rear view Control Panel Overview Green Blinking Understanding the Status LEDStatus Description Off TCP/IP Menu Overview Supplied Software Printer Driver FeaturesContents Feature Windows Linux Macintosh Getting started Setting UP the Hardware Requirements System RequirementsWindows Operating Free System CPU RAM HDD Space Configuring network protocol via the machine Setting UP the NetworkSupported operating systems Starting the program Installing the SoftwareUsing SetIP program Installing the program Changing the display language Machines Basic SettingsAltitude adjustment Click Printer Setting Setting sounds Setting the date and timeChanging the clock mode Changing the default mode Setting print job timeout Using the save modes Click Printer Setting Click Emulation Changing the font setting ADF Loading originals and print mediaLoading Originals On the scanner glass Selecting Print Media Type Size Dimensions Weighta Capacityb Specifications on print media Media Type Guidelines Media sizes supported in each modeMode Size Source Guidelines for special print media Full Changing the Size of the Paper in the Paper TrayLoading Paper Loading paper in the tray 1 or optional tray Label Printing on Special Print MaterialsFeeding the print material manually Punched paper Card stock Setting the Paper Size and Type Adjusting the Output SupportStacking papers firmly Copying Changing the Settings for Each CopyCopying Selecting the Paper Tray Collation Changing the Default Copy SettingsUsing Special Copy Features ID Card Copying Clone copying Adjusting background imagesUp or 4-up copying Poster copying Printing on Both Sides of Paper Setting Copy Timeout Scanning to application programs ScanningScanning Basics Scanning from the Control Panel Scanning by a Network Connection Setting scan information in Samsung Scan ManagerUser authentication for network scanning Setting up an e-mail account Changing the Default Scan Settings Changing the Settings for Each Scan JOBSetting UP Address Book Searching Address Book for an entry Using Address Book entriesPrinting Address Book Basic printing Canceling a Print JOBPrinting a Document Sending a FAX Setting the fax headerAdjusting the document settings Faxing Receiving a FAX Receiving automatically in Ans/Fax mode Receiving automatically in Fax modeReceiving manually in Tel mode Receiving manually using an extension telephone Receiving faxes in memory Activating secure receiving modeSending a delayed fax Other Ways to FAX Forwarding faxes Sending a priority fax Sending options FAX SetupChanging the fax setup options Forwarding received faxes to email address Speed dial numbers Changing the default document settingsSetting up Address Book Printing sent fax report automatically Printing Address Book Group dial numbersSearching Address Book for an entry Deleting a Address Book entry Scanning to a USB Memory Device Using USB flash memoryAbout USB Memory Plugging in a USB Memory Device Backing UP Data Printing from a USB Memory Device Viewing the USB memory status Managing USB MemoryDeleting an image file Formatting a USB memory device REPORT/LIST Description MaintenancePrinting Reports Printing a report Clearing Memory Cleaning Your MachineCleaning the outside Cleaning the inside Maintaining the Cartridge Cleaning the scan unitToner cartridge storage Redistributing toner Handling instructionsUse of non-Samsung and refilled toner cartridge Estimated cartridge life Replacing the Toner Cartridge Replacing the ADF rubber pad Maintenance PartsClearing the Toner Empty message Checking replaceables Managing Your Machine from the Website To access SyncThru Web ServiceChecking the MACHINE’S Serial Number Input Misfeed TroubleshootingTips for Avoiding Paper Jams Clearing Document Jams Message Location of JAM GO to Clearing Paper JamsRoller misfeed Paper feed area Duplex unit area Manual trayToner cartridge area Paper exit area Optional tray Understanding Display Messages Message Meaning Suggested Solutions Memory Full Assigned Page/Cancel JobSend Error Wrong Config Condition Suggested Solutions Solving Other ProblemsPaper feeding Condition Possible Suggested Solutions Cause Printing problems Printing quality problems Characters Vertical repetitiveDefects Misformed Copying problems Fax problems Scanning problems Some color images Common Windows problemsCommon Linux problems Not print Not print whole pages Encounter errorCome out Unexpected color Some parts of graphics Text, or illustrations are Common Macintosh problemsNot scan Printer does not Supplies Ordering supplies and accessoriesAccessories HOW to Purchase Upgrading a Memory Module Installing accessoriesPrecautions to Take When Installing Accessories Installing a memory module General Specifications Specifications Scanner Specifications Printer Specifications Facsimile Specifications Copier Specifications Glossary Fuser Unit ITU-T No chartEthernet EtherTalk Originals MAC addressModem NetWare Watermark Subnet MaskToner Cartridge UNC Path LED Index Receiving a fax COUNTRY/REG Customer Care WEB Site ION Center Contact samsung worldwide Russia Page Rev Software section Contents Sharing the Printer Locally Using Your Printer in Linux Select Typical installation for a local printer. Click Next Installing Printer SoftwareInstalling Software for Local Printing Typical Installation Custom Installation Select the components to be installed and click Next Select Custom installation. Click Next Installing Software for Network Printing Custom Installation Click Next Reinstalling Printer Software Removing Printer Software Select the components you want to reinstall and click Next Recommended, Option due to the machineís setting or environmentPrinting a Document Means you can select that certain option but it is not Printing to a file PRN Printer SettingsSelect Printers and Faxes Select your printer driver icon Source Layout TabPaper Tab Paper Orientation Scaling Printing Graphics Tab Overlay Extras TabAdvanced Options Watermark Printer Tab Using a Favorite SettingUsing Help About Tab Printing Multiple Pages on One Sheet of Paper N-Up Printing Advanced Printing Printing Booklets Printing Posters None Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document Fitting Your Document to a Selected Paper Size Editing a Watermark Using WatermarksUsing an Existing Watermark Creating a Watermark Creating a New Page Overlay Using OverlaysWhat is an Overlay? Using a Page Overlay Double-clickPrinters and Faxes Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer box Working area Scanning Using Samsung SmarThru OfficeUsing Samsung SmarThru Office SmarThru Office window opens Uninstalling Samsung SmarThru Office Scanning Process with TWAIN- enabled SoftwareUsing Onscreen Help File Windows Vista Scanning Using the WIA DriverSettings, Control Panel, and then Scanners and Cameras Windows XP Toner Level Troubleshooting GuidePrinter Setting Understanding Smart Panel Driver Setting Only for Windows Opening the Troubleshooting GuideUsing Printer Settings Utility Changing the Smart Panel Program Settings Getting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver When the welcome screen appears, click Next Click Uninstall Uninstalling the Unified Linux DriverClick Next Click Finish Printers Tab Using the Unified Driver ConfiguratorPrinters Configuration Opening the Unified Driver Configurator Sharing Ports Between Printers and Scanners Scanners ConfigurationPorts Configuration Classes Tab Printing from Applications Configuring Printer PropertiesChange the printer and print job properties To print any document file Scanning a DocumentPrinting Files Following four tabs display at the top of the window Adding Job Type Settings Using the Image Manager You can use the following tools to edit the image Tools Function Select Easy Install and click Install. Easy Install is Installing SoftwareInstalling the Printer driver Uninstalling the Printer driver Click Add on the Printer List Setting Up the PrinterFor a Network-connected For a USB-connected Layout Changing Printer SettingsPrinting Printing a Document Graphics Printer SettingsPaper Duplex Printing Printing Multiple Pages on One Sheet of PaperSelect the page order from the Layout Direction option Scanning with network Setting scan information in Scan ManagerScanning Scanning with USB Press OK after setting is done Index Windows 15 toner save 15 true-type option