
Handling instructions
•Do not touch the surface of the photosensitive drum in the cartridge.
•Do not expose the cartridge to unnecessary vibrations or shock.
•Never manually rotate the drum, especially in the reverse direction; this can cause internal damage and toner spillage.
Use of non-Samsung and refilled toner cartridge
Samsung Electronics does not recommend or approve the use of non- Samsung brand toner cartridges in your printer including generic, store brand, refilled, or remanufactured toner cartridges.
Samsung’s printer warranty does not cover damage to the machine caused by the use of a refilled, remanufactured, or non- Samsung brand toner cartridge.
Estimated cartridge life
Estimated cartridge life (the life of the toner cartridge yield) depends on the amount of toner that print jobs require. The actual
Redistributing toner
When a toner is low, faded or light areas may appear. You can temporarily improve print quality by redistributing the toner.
•The
•The SmartPanel program window appears on the computer telling you which cartridge is low on toner.
1.Completely open the front cover.
• Do not touch the green surface, the OPC drum or the front of the toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
•Be careful not to scratch the surface of the paper transfer belt.
•If you leave the front cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the front cover should the installation need to be halted for any reason.
2.Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine.
3.Holding both handles on the toner cartridge, thoroughly rock it from side to side to evenly distribute the toner.
If toner gets on your clothing, wipe it off with a dry
cloth and wash it in cold water. Hot water sets toner into fabric.
4.Slide the toner cartridge back into the machine.
5.Close the front cover. Make sure the cover is securely latched.
If the front cover is not completely closed, the machine will not operate.
60_Maintenance