1.Remove any remaining pages from the ADF.

2.Seize the misfeed paper, and remove the paper from the document output tray by carefully pulling it to the right using both hands.

3.Load the removed pages back into the ADF.

Roller misfeed

1.Open the scanner lid.

2.Seize the misfeed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands.

3.Close the scanner lid. Then load the removed pages back into the ADF.

CLEARING PAPER JAMS

When a paper jam occurs, the warning message appears on the display screen. Refer to the table below to locate and clear the paper jam.

MESSAGE

LOCATION OF JAM

GO TO

 

 

 

Paper Jam 0

In the paper feed area or

Page 65, Page 66

Open/Close Door

inside the machine

 

Paper Jam 1

Inside the machine

Page 66

Open/Close Door

 

 

Paper Jam 2

Inside the machine or in

Page 66

Check Inside

the fuser area

 

Duplex Jam 0

Inside the machine

Page 66

Check Inside

 

 

Duplex Jam 1

In the paper feed area or

Page 66

Open/Close Door

inside the machine

 

 

 

 

Some messages may not appear in the display depending on options or models.

To avoid tearing the paper, pull the jammed paper out gently and slowly. Follow the instructions in the following sections to clear the jam.

In the paper feed area

If paper is jammed in the paper feed area, follow the next steps to release the jammed paper.

1.Pull the tray open.

2.Remove the jammed paper by gently pulling it straight out as shown below.

If the paper does not move when you pull, or if you do not see the paper in this area, check In the toner cartridge area.

3.Insert the tray back into the machine. Printing automatically resumes.

Troubleshooting_ 65

Page 65
Image 65
Samsung SCX4826FN, SCX-4x26 manual Clearing Paper Jams, Roller misfeed, Paper feed area, Message Location of JAM GO to