Messages
Delivery after: you can set the delay time before the phone sends your messages.
Leave a copy: allows you to copy the message that you sent.
Address hiding: when this option sets to On, your phone number does not display on the recipients phone.
Delivery report: when this option sets to On, the network informs you whether or not your message has been delivered.
Read reply: when this option sets to On, your recipient’s phone sends a reply to let you know when your message was read by her/him.
Receive settings: the following options are available:
Message reception: allows you to set how you receive a message. You can select one of Manual, Automatic and Reject.
Anonymous reject: when this option sets to On, your phone rejects messages without a caller ID.
Adverts reject: when this option sets to On, you can reject advertisements by service provider.
Report allowed: when this option sets to On, your phone does not send a reply to the recipient’s phone even if the sender asks for the read reply.
MMS profiles: in this menu, you can configure MMS profile settings that are required when you send or receive multimedia messages.
Current profile: allows you to select one profile to use currently.
Profile setting: allows you to set up to five profiles.
Messages
•Profile name: enter the name of the profile.
•Server URL: enter the address of profile server.
•GSM setting: allows you to change the proxy settings for the GSM network.
-Gateway: enter the IP address and IP port.
-Data call type: select a network connection type between ISDN and Analogue.
-Dial number: enter the server phone number.
-Login ID: enter the server login ID.
-Password: enter the server password.
•GPRS setting: allows you to change the proxy settings for the GPRS network.
-Gateway: enter the IP address and IP port.
-APN: enter the access point name used for the address of the GPRS network gateway.
-Login ID: enter the user ID required to connect to GPRS network.
-Password: enter the password required to connect to the GPRS network.
•Bearer: select the bearer to be used for each type of network accesses.
-GPRS only: it only works in GPRS network.
-GSM only: it only works in GSM network.
88 | 89 |
