Minolta Scanner Mode user manual Specifying the 2in1 transmission setting

Performing an Internet Fax/IP Address FAX Operation

8

2Select how to output the report, and then touch [Enter].

❍To output the transmission report in method that has been previously specified, touch [Default]. Refer to “Specifying Report Output Settings” on page 13-41.

❍To output a transmission result report with every transmission, touch [On].

❍To output a transmission result report only if the transmission failed, touch [If TX Fail].

❍To stop the transmission result report from being outputted, touch [Off].

Specifying the 2in1 transmission setting

➜Touch [Set 1], and then touch [2in1].

[2in1] is highlighted.

Scanner Mode 8-25