10

Using IP Scanner

Using a dial-up router

When using IP Scanner, be sure that the IP address of the main device is correctly specified.

If an incorrect IP address is specified in an environment where a dial- up router is used, the dial-up router may unnecessarily be dialed up. In addition, depending on the network environment of the computer, the dial-up router may be unnecessarily dialed up, regardless of whether the correct IP address was specified.

Using a modem or terminal adapter

If a computer with a built-in modem (or a computer connected to terminal adapter) is used, they may be used to dial up.

If this occurs, select either “Never dial a connection” or “Dial whenever a network connection is not present” in the “Dial-up settings” group box on the Connections tab of the Internet Properties dialog box. For details, refer to the instruction manual for the operating system.

10-2

Scanner Mode

Page 187
Image 187
Minolta Scanner Mode user manual Using a dial-up router, Using a modem or terminal adapter